Contoh Kasus :
Domain : biner.com
IP server : 192.168.254.1
1. Install linux Suse 10.2
Siapkan PC untuk install linux suse, install dengan mode text.
2. Setting IP
yast -> Network Device -> Network Card -> Traditional Method with ifup -> pilih card -> edit -> Statistic Address Setup
-> Ip Address : 192.168.254.1 -> Subnet Mask : 255.255.255.0 -> Next -> Finish
3. Hostname
yast -> Network Service -> DNs and Hostname -> Hostname : server -> Domain Name : biner.com -> Finish
4. Install aplikasi
untuk DNS :
bind
DNS Server
untuk webserver:
apache
yast2-http-server
tool:
mc
5. aktifkan IP forwarding
Yast -> Network Service -> routing
aktifkan : enable IP Forwarding
6. Menjalankan bind
# /etc/init.d/named start
7. setting DNS
a. named.conf
1. vi /etc/named.conf
# Copyright (c) 2001-2004 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Frank Bodammer, Lars Mueller
#
# /etc/named.conf
#
# This is a sample configuration file for the name server BIND 9. It works as
# a caching only name server without modification.
#
# A sample configuration for setting up your own domain can be found in
# /usr/share/doc/packages/bind/sample-config.
#
# A description of all available options can be found in
# /usr/share/doc/packages/bind/misc/options.
options {
# The directory statement defines the name server’s working directory
directory “/var/lib/named”;
# Write dump and statistics file to the log subdirectory. The
# pathenames are relative to the chroot jail.
dump-file “/var/log/named_dump.db”;
statistics-file “/var/log/named.stats”;
# The forwarders record contains a list of servers to which queries
# should be forwarded. Enable this line and modify the IP address to
# your provider’s name server. Up to three servers may be listed.
#forwarders { 192.0.2.1; 192.0.2.2; };
# Enable the next entry to prefer usage of the name server declared in
# the forwarders section.
#forward first;
# The listen-on record contains a list of local network interfaces to
# listen on. Optionally the port can be specified. Default is to
# listen on all interfaces found on your system. The default port is
# 53.
#listen-on port 53 { 127.0.0.1; };
# The listen-on-v6 record enables or disables listening on IPv6
# interfaces. Allowed values are ‘any’ and ‘none’ or a list of
# addresses.
listen-on-v6 { any; };
# The next three statements may be needed if a firewall stands between
# the local server and the internet.
#query-source address * port 53;
#transfer-source * port 53;
#notify-source * port 53;
# The allow-query record contains a list of networks or IP addresses
# to accept and deny queries from. The default is to allow queries
# from all hosts.
#allow-query { 127.0.0.1; };
# If notify is set to yes (default), notify messages are sent to other
# name servers when the the zone data is changed. Instead of setting
# a global ‘notify’ statement in the ‘options’ section, a separate
# ‘notify’ can be added to each zone definition.
notify no;
include “/etc/named.d/forwarders.conf”;
};
# To configure named’s logging remove the leading ‘#’ characters of the
# following examples.
#logging {
# # Log queries to a file limited to a size of 100 MB.
# channel query_logging {
# file “/var/log/named_querylog”
# versions 3 size 100M;
# print-time yes; // timestamp log entries
# };
# category queries {
# query_logging;
# };
#
# # Or log this kind alternatively to syslog.
# channel syslog_queries {
# syslog user;
# severity info;
# };
# category queries { syslog_queries; };
#
# # Log general name server errors to syslog.
# channel syslog_errors {
# syslog user;
# severity error;
# };
# category default { syslog_errors; };
#
# # Don’t log lame server messages.
# category lame-servers { null; };
#};
# The following zone definitions don’t need any modification. The first one
# is the definition of the root name servers. The second one defines
# localhost while the third defines the reverse lookup for localhost.
zone “.” in {
type hint;
file “root.hint”;
};
zone “localhost” in {
type master;
file “localhost.zone”;
};
zone “0.0.127.in-addr.arpa” in {
type master;
file “127.0.0.zone”;
};
# Include the meta include file generated by createNamedConfInclude. This
# includes all files as configured in NAMED_CONF_INCLUDE_FILES from
# /etc/sysconfig/named
include “/etc/named.conf.include”;
# You can insert further zone records for your own domains below or create
# single files in /etc/named.d/ and add the file names to
# NAMED_CONF_INCLUDE_FILES.
# See /usr/share/doc/packages/bind/README.SUSE for more details.
2. Tekan tombol Insert untuk edit file named.conf, tambahkan dibawah ini
zone “biner.com” {
type master;
file “/var/lib/named/master/biner.com.hosts”;
};
zone “254.168.192.in-addr.arpa” {
type master;
file “/var/lib/named/master/192.168.254.rev”;
};
3. simpan
tekan Esc + shift : wq
B. biner.com.hosts
1. vi /var/lib/named/master/biner.com.hosts
$ttl 38400
biner.com. IN SOA server.biner.com. server.biner.com. (
2010012302
10800
3600
604800
38400 )
biner.com. IN NS server.biner.com.
server.biner.com. IN A 192.168.254.1
biner.com. IN MX 10 mail.biner.com
C. 192.168.254.rev
1. vi /var/lib/named/master/192.168.254.rev
$ttl 38400
254.168.192.in-addr.arpa. IN SOA server.biner.com. server.biner.com. (
2010012301
10800
3600
604800
38400 )
254.168.192.in-addr.arpa. IN NS server.biner.com.
1.254.168.192.in-addr.arpa. IN PTR server.biner.com.
D. Cek DNS
1. Restart bind
# /etc/init.d/named restart
Shutting down name server BIND done
Starting name server BIND done
(jika masih belum muncul seperti di atas masih salah cek lagi penulisannya )
2. cek host
# host server.biner.com
server.biner.com has address 192.168.254.1
3. cek server
# nslookup server
Server: 127.0.0.1
Address: 127.0.0.1#53
